iNOVA 2000 - Image 1
iNOVA 2000 - Image 2
iNOVA 2000 - Image 3
Click to enlarge
iNOVA 2000
iNOVA 2000 - Image 2
iNOVA 2000 - Image 3
CIBER

iNOVA 2000

Modern technology with a mixing performance of 200 t/h, on just two semi-trailers.

Wheel-mounted, continuous asphalt mixing plant iNOVA 2000. State-of-the-art technology for the production of asphalt mixes, combining a production capacity of up to 200 t/h on just 2 transport vehicles. The unit has up to six feed hoppers each with its own weighing. The CIBER Total Air burner and the innovative, automatic flue gas flow/temperature control guarantee optimum fuel consumption. Mixing is done externally by a twin-shaft pugmill which, in addition to automatically controlling the mixing time, ensures maximum homogeneity of the end product. Depending on configuration, it is possible to use recycling material. The modern plant control system is easy to use and comes with 100% automatic mode, diagnostics system and remote monitoring

  • Production at up to 200 t/h
  • Needs only two transport vehicles
  • Efficient fuel consumption
  • High performance for special mixes
  • Easy operation and optimised maintenance
Get Instant Quote

Reviews

There are no reviews yet.

Be the first to review “iNOVA 2000”

Your email address will not be published. Required fields are marked *

Related products

Quick view

HC 119

HAMM
  • Engine with best in class power and powerful ECO mode
  • Excellent view of the machine and the construction site
  • Easy maintenance and servicing
  • Intuitive and language-neutral operation
  • High compaction performance
  • 3-point articulation for even weight distribution and excellent on-centre feel
Quick view

HC 200

HAMM
  • High compaction performance
  • Spacious driver's platform with Easy Drive operating concept
  • Hammtronic for high comfort, safety and reduced emissions
  • Customised configuration possibilities and a wide range of options
  • Digital ready
Quick view

MR 110 EVO2

KLEEMANN

The mobile impact crusher MOBIREX MR 110 EVO2 can be deployed universally and produces first class final product quality. With a crusher inlet of 1100 mm and numerous technical highlights, a formidable production rate can be achieved with best cost effectiveness. Thanks to its compact design, the machine is easy to transport and can be assembled and disassembled again quickly.

  • Optimised material flow as a result of extending system widths
  • Hydraulic gap setting
  • Simple and intuitive SPECTIVE control concept
  • Efficient and powerful D-DRIVE diesel direct drive
  • High-performance post screening unit with oversize grain returning (option)
Quick view

MR 130 PRO

KLEEMANN

The MOBIREX MR 130 PRO covers a very wide application range in natural stone and recycling. A positive feature of the plant is its all-electric drive concept with the option of an external power supply. The CO2-free operation guarantees low energy consumption per ton of final product.

  • Generously dimensioned double-deck prescreen with 2.9 m2 open screening surface
  • Fully hydraulic gap adjustment and overload system
  • E-DRIVE Diesel-electric drive concept, external power supply (optional)
  • Simple and intuitive SPECTIVE control concept
  • Powerful double-deck post screening unit - use as single-deck and double-deck screen
Quick view

SP 25

WIRTGEN
Unique, multi-functional offset and inset slipform paver
  • The multifunctional slipform paver builds a variety of monolithic profiles up to 2.0 high.
  • Concrete surfaces up to a paving width of 3.5 m can be applied both as an inset and offset method (not in combination with all options).
  • Single or two hydraulic parallelogram swing arms at the front and a hydraulically telescopic track unit at the rear enable extremely flexible paving.
  • The intelligent, electronic steering and control concept enables driving in extremely tight diameters and high adaptability to any construction site situation.
  • The machine can precisely control the reading from the offset wire via the offset radio WIRTGEN AutoPilot 2.0 or 3D applications.
Quick view

SP 64

WIRTGEN
Fully modular inset slipform paver
  • The 4-track flexible slipform paver is characterised by its extremely wide range of applications in the construction of road and flight operating surfaces with widths of 2.0 m to 7.5 m and a thickness of 450 mm.
  • The machine concept offers the highest level of quality for surface smoothness.
  • The fully modular machine structure, the possibility of easy modification and development, as well as the hydraulic swing arms offer high adaptability to any construction site situation.
  • The intelligent, electronic steering and control system ensures precise driving behavior for the four track units and thus precise concrete paving.
  • The exact insertion of the connecting bar and dowels thanks to a self-loading connecting bar inserter (optional) ensures the concrete paving with reinforcement requirements.
Quick view

SUPER 1800-5 X

VÖGELE
Tried-and-tested all-rounder at Dash 5 level

With pave widths between 2.55 and 10 metres, high performance and compact dimensions, the tracked paver SUPER 1800-5 X-Tier is the most versatile VÖGELE paver in the Universal Class. As a paver of the Dash 5 generation, the most successful model in the 1800 series sets new standards in terms of user-friendliness, automation, cost-effectiveness and sustainability.

Quick view

SUPER 1900-3 G

VÖGELE
Robust, powerful and easy to operate

The SUPER 1900-3 G-Tier takes and gives a lot. Paving base courses up to 30 cm thick requires extremely powerful and durable pavers. VÖGELE‘s SUPER 1900-3 G is a cost-efficient, heavy-duty tracked paver designed for paving both water-bound materials and asphalt mixes.