TM 303020P - Image 1
Click to enlarge
CIBER

TM 303020P

Tank with up to 80,000-litre capacity for storage and heating of fluids

Transportable master tank for bitumen only, as well as a combination tank for bitumen and fuel. Tank is divided into three chambers with a total capacity of 80,000 litres (30,000 + 30,000 + 20,000 l). A heat generator with a capacity of 500,000 kcal/h can heat the bitumen and keep it at the ideal temperature for the production of high-quality asphalt mixes.

  • Transportable tank
  • Tank with three chambers and high capacity
  • Thermal oil heating with 500,000 kcal/h output
Get Instant Quote

Reviews

There are no reviews yet.

Be the first to review “TM 303020P”

Your email address will not be published. Required fields are marked *

Related products

Quick view

220 SM 3.8

WIRTGEN
Maximum performance in soft rock
  • The design of the 3.8 m cutting drum unit of the 220 SM 3.8 / 220 SMi 3.8 models is optimised for the mining and quarrying of soft rock and guarantees maximum productivity and minimised operating costs.
  • The Surface Miner extracts natural resources with a uniaxial compressive strength of up to 35 MPa to cutting depths of up to 350 mm.
  • The 220 SM 3.8 / 220 SMi 3.8 models are the ideal choice for use in all mining and quarrying operations, regardless of their size.
  • Natural resources are extracted in high quality without drilling and blasting in a single, environmentally compatible operation.
  • When using the windrowing method, the extracted material is continuously deposited in rows behind the machine.
Quick view

4200 SM

WIRTGEN
Maximum performance in large-scale opencast mining
  • Surface miner with the highest mining capacity for the selective extraction of hard or soft rock.
  • The 4.2 m cutting drum unit, which is precisely tailored to the respective application and has a cutting depth of up to 830 mm in soft stone, achieves high cutting performance with minimal bit wear.
  • The powerful, liftable and swivelling rear loading conveyor allows SKW to be loaded with a payload of 120 to 220 tonnes.
  • With an annual output of up to 12 million tons in soft rock, the miner is ideal for large-scale opencast mining.
  • The all-round glazed cab is heated, air-conditioned, soundproofed and vibration-decoupled for fatigue-free, productive work.
Quick view

MC 110 EVO2

KLEEMANN

The jaw crusher MOBICAT MC 110 EVO2 is used for pre-crushing of almost all natural stone and for recycling. Compact dimensions, efficient prescreening, simple operation via SPECTIVE as well as impressive production output characterise the efficient key player.

  • Continuous Feed System (CFS) for optimum crusher loading
  • Innovative crusher unblocking system for extremely short downtimes
  • Innovative overload and control systems for protection of the crusher
  • Independently vibrating double‐deck prescreen
  • Efficient and powerful D-DRIVE diesel-direct drive
Quick view

MR 100 NEOe

KLEEMANN

Kleemann presents the first family member of the new NEO line in the shape of the MOBIREX MR 100(i) NEO mobile impact crusher. Thanks to its compact dimensions and low transport weight, the MOBIREX MR 100(i) NEO can be used flexibly, quickly and in a very wide variety of applications. Cramped conditions on construction sites or frequent application changes can be overcome easily. The potential uses range from different recycling applications, such as the processing of concrete, mixed rubble and asphalt, to the processing of soft to medium-hard natural stone.

  • Two drive versions available: D-DRIVE and E-DRIVE (only for MR 100(i) NEOe)
  • Fully hydraulic gap adjustment and overload system
  • Powerful crusher unit, 4-ledged rotor with large impact range
  • Simple operation thanks to SPECTIVE smaller operating unit
Quick view

MR 110 EVO2

KLEEMANN

The mobile impact crusher MOBIREX MR 110 EVO2 can be deployed universally and produces first class final product quality. With a crusher inlet of 1100 mm and numerous technical highlights, a formidable production rate can be achieved with best cost effectiveness. Thanks to its compact design, the machine is easy to transport and can be assembled and disassembled again quickly.

  • Optimised material flow as a result of extending system widths
  • Hydraulic gap setting
  • Simple and intuitive SPECTIVE control concept
  • Efficient and powerful D-DRIVE diesel direct drive
  • High-performance post screening unit with oversize grain returning (option)
Quick view

SP 25

WIRTGEN
Unique, multi-functional offset and inset slipform paver
  • The multifunctional slipform paver builds a variety of monolithic profiles up to 2.0 high.
  • Concrete surfaces up to a paving width of 3.5 m can be applied both as an inset and offset method (not in combination with all options).
  • Single or two hydraulic parallelogram swing arms at the front and a hydraulically telescopic track unit at the rear enable extremely flexible paving.
  • The intelligent, electronic steering and control concept enables driving in extremely tight diameters and high adaptability to any construction site situation.
  • The machine can precisely control the reading from the offset wire via the offset radio WIRTGEN AutoPilot 2.0 or 3D applications.
Quick view

TCM 95

WIRTGEN
Optimum texture and protection for concrete surfaces up to 9.5 m wide
  • The modular machine design allows it to be adapted to working widths between 4.0 m and 9.5 m.
  • The self-propelled texture curing machine produces the desired surface textures on the freshly paved concrete surface.
  • The automated spraying system with a generously sized storage container effectively distributes the dispersion and protects the concrete surface from premature drying.
  • The various texture and spray modes as well as other texture alternatives offer a wide range of functionality.
  • An extensive array of options that can be combined without additional installation work make a wide variety of applications possible while guaranteeing maximum machine availability.
Quick view

W 130 Fi

WIRTGEN
Innovation and sustainability for versatile scarifier uses
  • The front loader in the one-meter class impresses with high performance and flexibility with a working width of 1.3 m.
  • Compact dimensions and optimised machine weight ensure a high range of applications on narrow construction sites such as urban areas.
  • FCS milling rollers with different blade openings and working widths further expand the application options.
  • The modern leveling system LEVEL PRO ACTIVE, the intuitive control concept and other digital assistance systems ensure efficient one-man control and precise milling results.
  • The innovative machine control MILL ASSIST ensures sustainable, efficient machine operation with high productivity.