WIRTGEN

4200 SM

Maximum performance in large-scale opencast mining

Surface miner with the highest mining capacity for the selective extraction of hard or soft rock.
The 4.2 m cutting drum unit, which is precisely tailored to the respective application and has a cutting depth of up to 830 mm in soft stone, achieves high cutting performance with minimal bit wear.
The powerful, liftable and swivelling rear loading conveyor allows SKW to be loaded with a payload of 120 to 220 tonnes.
With an annual output of up to 12 million tons in soft rock, the miner is ideal for large-scale opencast mining.
The all-round glazed cab is heated, air-conditioned, soundproofed and vibration-decoupled for fatigue-free, productive work.

Get Instant Quote

Reviews

There are no reviews yet.

Be the first to review “4200 SM”

Related products

Quick view

MR 100 NEO

KLEEMANN

With the mobile impact crusher MOBIREX MR 100(i) NEO, Kleemann presents the first family member of the new NEO line. Thanks to their compact dimensions and a low transport weight, the MOBIREX MR 100(i) NEO can be used flexibly, quickly and in a very wide variety of applications. Tight work site conditions or frequent application changes can be overcome easily. Operation ranges from different recycling applications, such as the processing of concrete, rubble and asphalt, to the processing of soft to medium-hard natural stone.

Two drive versions available: D-DRIVE and E-DRIVE (only for MR 100(i) NEOe)
Fully hydraulic gap adjustment and overload system
Powerful crusher unit, 4-ledged rotor with large impact range
Simple operation thanks to SPECTIVE smaller operating unit

Quick view

MR 110 EVO2

KLEEMANN

The mobile impact crusher MOBIREX MR 110 EVO2 can be deployed universally and produces first class final product quality. With a crusher inlet of 1100 mm and numerous technical highlights, a formidable production rate can be achieved with best cost effectiveness. Thanks to its compact design, the machine is easy to transport and can be assembled and disassembled again quickly.

Optimised material flow as a result of extending system widths
Hydraulic gap setting
Simple and intuitive SPECTIVE control concept
Efficient and powerful D-DRIVE diesel direct drive
High-performance post screening unit with oversize grain returning (option)

Quick view

SP 33

WIRTGEN

The compact slipform paver can pave a wide range of monolithic concrete profiles such as curbs, curb-gutter profiles, rectangular profiles, concrete safety barriers up to 1.3 m, drainage channels and gutter profiles.

Quick view

SP 64

WIRTGEN

Fully modular inset slipform paver

The 4-track flexible slipform paver is characterised by its extremely wide range of applications in the construction of road and flight operating surfaces with widths of 2.0 m to 7.5 m and a thickness of 450 mm.
The machine concept offers the highest level of quality for surface smoothness.
The fully modular machine structure, the possibility of easy modification and development, as well as the hydraulic swing arms offer high adaptability to any construction site situation.
The intelligent, electronic steering and control system ensures precise driving behavior for the four track units and thus precise concrete paving.
The exact insertion of the connecting bar and dowels thanks to a self-loading connecting bar inserter (optional) ensures the concrete paving with reinforcement requirements.

Quick view

SW 318 MC

WIRTGEN

Precise and Powerful Binding Agent Spreading

STREUMASTER binding agent spreaders are suitable both for spreading large quantities of binding agents during soil stabilisation and for spreading small quantities of binding agents with maximum precision during cold recycling.
There are various different types and series of binding agent spreaders. Essentially, these can be subdivided according to type into the categories truck-mounted spreaders (M – Mounted) and towed spreaders (T – Towed). In addition to the vehicle type, these types also differ in the form of their spreading units: STREUMASTER primarily offers spreaders with cellular wheel spreading units (C - Cellular wheel).
The MC series mobile binding agent spreaders are mounted on a carrier vehicle and are therefore predestined for use in difficult off-road terrain.
With a maximum spreading width of 2,360 mm the TC and MC series achieve spreading rates of up to 60 kg/m2 (at a speed of 2 km/h with a binder density of 1 kg/l).
In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent spreaders cover the complete cycle in road construction and earthworks.

Quick view

SW 418 MC

WIRTGEN

Precise and Powerful Binding Agent Spreading

STREUMASTER binding agent spreaders are suitable both for spreading large quantities of binding agents during soil stabilisation and for spreading small quantities of binding agents with maximum precision during cold recycling.
There are various different types and series of binding agent spreaders. Essentially, these can be subdivided according to type into the categories truck-mounted spreaders (M – Mounted) and towed spreaders (T – Towed). In addition to the vehicle type, these types also differ in the form of their spreading units: STREUMASTER primarily offers spreaders with cellular wheel spreading units (C - Cellular wheel).
The MC series mobile binding agent spreaders are mounted on a carrier vehicle and are therefore predestined for use in difficult off-road terrain.
With a maximum spreading width of 2,360 mm the TC and MC series achieve spreading rates of up to 60 kg/m2 (at a speed of 2 km/h with a binder density of 1 kg/l).
In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent spreaders cover the complete cycle in road construction and earthworks.

Quick view

TCM 95

WIRTGEN

Optimum texture and protection for concrete surfaces up to 9.5 m wide

The modular machine design allows it to be adapted to working widths between 4.0 m and 9.5 m.
The self-propelled texture curing machine produces the desired surface textures on the freshly paved concrete surface.
The automated spraying system with a generously sized storage container effectively distributes the dispersion and protects the concrete surface from premature drying.
The various texture and spray modes as well as other texture alternatives offer a wide range of functionality.
An extensive array of options that can be combined without additional installation work make a wide variety of applications possible while guaranteeing maximum machine availability.

Quick view

W 150 Fi

WIRTGEN

Powerful, agile compact milling cutter for a variety of milling tasks

The most powerful cold milling machine in its compact class is particularly suitable for medium-sized construction projects in confined spaces, such as urban areas.
The innovative machine control Mill assist ensures sustainable, efficient machine operation with high productivity.
The MCS – Multiple Cutting System with Basic or Variabel options enables the use of various milling drums with a working width of 0.6 m to a maximum of 1.8 m for greater operational flexibility and machine efficiency.
The modern leveling system LEVEL PRO ACTIVE, the intuitive control concept and other digital assistance systems ensure efficient one-man control and precise milling results.
The optimised machine weight makes transport easier and the centrally positioned milling drum unit ensures ideal weight distribution and high traction.