MSS 802 EVO

Changing work sites and new applications often create challenges for screening plants. The mobile screen for coarse elements MOBISCREEN MSS 802 EVO is ideally prepared for this. The large range of screen surfaces and the simple setting of screening parameters make it possible to adapt the MSS 802 EVO easily to new application conditions.

Mobile double-deck screening unit
H-DRIVE Diesel-hydraulic drive
Screen for coarse elements
Maximum feed size 500 mm

Get Instant Quote

Reviews

There are no reviews yet.

Be the first to review “MSS 802 EVO”

Related products

Quick view

4200 SM

WIRTGEN

Maximum performance in large-scale opencast mining

Surface miner with the highest mining capacity for the selective extraction of hard or soft rock.
The 4.2 m cutting drum unit, which is precisely tailored to the respective application and has a cutting depth of up to 830 mm in soft stone, achieves high cutting performance with minimal bit wear.
The powerful, liftable and swivelling rear loading conveyor allows SKW to be loaded with a payload of 120 to 220 tonnes.
With an annual output of up to 12 million tons in soft rock, the miner is ideal for large-scale opencast mining.
The all-round glazed cab is heated, air-conditioned, soundproofed and vibration-decoupled for fatigue-free, productive work.

Quick view

HC 119

HAMM

Engine with best in class power and powerful ECO mode
Excellent view of the machine and the construction site
Easy maintenance and servicing
Intuitive and language-neutral operation
High compaction performance
3-point articulation for even weight distribution and excellent on-centre feel

Quick view

MC 120 PRO

KLEEMANN

The MOBICAT MC 120 PRO, the first jaw crusher in the PRO line, is used for pre-crushing almost all types of natural stone. The jaw crusher is extremely robust and impresses with its low-maintenance operation. The machine therefore guarantees high production outputs.

Extremely robust design
Very high production output with low-maintenance operation
Crusher unblocking system via frequency converter (optional)
External power supply (optional)
Ideal combination with downstream MOBICONE MCO 110 PRO cone crusher

Quick view

SP 124

WIRTGEN

Slipform paver for cost-effective, large-scale concrete paving

The inset slipform paver is the perfect choice for the cost-effective paving of large concrete surfaces ranging from 4.5 m to 12.0 m wide and 450 mm thick.
The slipform paver can be easily adapted to any job site situation due to the machine frame that can be hydraulically telescoped lengthwise and mechanically telescoped sideways.
Standard-configuration with four track units on hydraulic arms that can be conveniently swung in for easier transportation and offer outstanding adaptability for all on-site situations.
Precise insertion of tie bars and dowel bars via self-loading dowel bar inserter (optional) enables concrete paving over reinforcing steel.
The intelligent electronic steering and control concept ensures that the four crawler units move with pinpoint accuracy for high-precision concrete paving.

Quick view

SP 25

WIRTGEN

Unique, multi-functional offset and inset slipform paver

The multifunctional slipform paver builds a variety of monolithic profiles up to 2.0 high.
Concrete surfaces up to a paving width of 3.5 m can be applied both as an inset and offset method (not in combination with all options).
Single or two hydraulic parallelogram swing arms at the front and a hydraulically telescopic track unit at the rear enable extremely flexible paving.
The intelligent, electronic steering and control concept enables driving in extremely tight diameters and high adaptability to any construction site situation.
The machine can precisely control the reading from the offset wire via the offset radio WIRTGEN AutoPilot 2.0 or 3D applications.

Quick view

SP 33

WIRTGEN

The compact slipform paver can pave a wide range of monolithic concrete profiles such as curbs, curb-gutter profiles, rectangular profiles, concrete safety barriers up to 1.3 m, drainage channels and gutter profiles.

Quick view

SP 94

WIRTGEN

9 m class fully modular inset slipform paver

The 4-track flexible slipform paver is characterised by an extremely wide range of applications in the construction of road and flight operating surfaces with widths of 2.0 m to 9.5 m and a thickness of 450 mm.
The machine concept offers the highest level of quality for surface smoothness.
The fully modular machine structure, the possibility of easy modification and development, as well as the hydraulic swing arms offer high adaptability to any construction site situation.
The intelligent, electronic steering and control system ensures precise driving behavior for the four track units and thus precise concrete paving.
The exact insertion of the connecting bar and dowels thanks to a self-loading connecting bar inserter (optional) ensures the concrete paving with reinforcement requirements.

Quick view

TCM 180

WIRTGEN

Optimum texture and protection for concrete surfaces up to 18.0 m wide

The modular machine design allows it to be adapted to working widths between 4.0 m and 18.0 m.
The self-propelled texture curing machine produces the desired surface textures on the freshly paved concrete surface.
The automated spraying system with a generously sized storage container effectively distributes the dispersion and protects the concrete surface from premature drying.
The various texture and spray modes as well as other texture alternatives offer a wide range of functionality.
An extensive array of options that can be combined without additional installation work make a wide variety of applications possible while guaranteeing maximum machine availability.