GC 40 - Image 1
Click to enlarge
CIBER

GC 40

Stationary heat generator with a capacity of 400,000 kcal/h

The heat generator is made of the highest quality materials and its surface is fully thermally insulated. It has a fluid heater with a capacity of 400,000 kcal/h, which operates in a closed circuit with expansion tank and without pressure concentration.

  • Compact design
  • Efficient thermal oil heating
  • Rapid heating of the bitumen
Get Instant Quote

Reviews

There are no reviews yet.

Be the first to review “GC 40”

Your email address will not be published. Required fields are marked *

Related products

Quick view

280 SM

WIRTGEN
Maximum availability. Maximum productivity. 100 per cent mining
  • High-performance surface miners for reliable, selective extraction of raw materials by direct loading, sidecasting, or cut-to-ground.
  • Raw materials are extracted and crushed in situ in purest quality in a single operation – without drilling and blasting, and with minimal environmental impact.
  • The 2,750 mm cutting drum unit with a cutting depth of up to 650 mm is precisely adaptable to each specific application and achieves outstanding cutting performance with minimal cutting tool wear.
  • The powerful rear loading conveyor with a movable counterweight can be elevated and slewed to ensure a perfect flow of materials and makes it possible to load trucks with payloads of up to 100 tons.
  • Its air-conditioned and soundproofed operator’s cabin with all-round glazing is swivel-mounted on the front chassis column and provides a fatigue-free and productive working environment.
Quick view

MC 110 EVO2

KLEEMANN

The jaw crusher MOBICAT MC 110 EVO2 is used for pre-crushing of almost all natural stone and for recycling. Compact dimensions, efficient prescreening, simple operation via SPECTIVE as well as impressive production output characterise the efficient key player.

  • Continuous Feed System (CFS) for optimum crusher loading
  • Innovative crusher unblocking system for extremely short downtimes
  • Innovative overload and control systems for protection of the crusher
  • Independently vibrating double‐deck prescreen
  • Efficient and powerful D-DRIVE diesel-direct drive
Quick view

MR 100 NEOe

KLEEMANN

Kleemann presents the first family member of the new NEO line in the shape of the MOBIREX MR 100(i) NEO mobile impact crusher. Thanks to its compact dimensions and low transport weight, the MOBIREX MR 100(i) NEO can be used flexibly, quickly and in a very wide variety of applications. Cramped conditions on construction sites or frequent application changes can be overcome easily. The potential uses range from different recycling applications, such as the processing of concrete, mixed rubble and asphalt, to the processing of soft to medium-hard natural stone.

  • Two drive versions available: D-DRIVE and E-DRIVE (only for MR 100(i) NEOe)
  • Fully hydraulic gap adjustment and overload system
  • Powerful crusher unit, 4-ledged rotor with large impact range
  • Simple operation thanks to SPECTIVE smaller operating unit
Quick view

SUPER 1800-5 X

VÖGELE
Tried-and-tested all-rounder at Dash 5 level

With pave widths between 2.55 and 10 metres, high performance and compact dimensions, the tracked paver SUPER 1800-5 X-Tier is the most versatile VÖGELE paver in the Universal Class. As a paver of the Dash 5 generation, the most successful model in the 1800 series sets new standards in terms of user-friendliness, automation, cost-effectiveness and sustainability.

Quick view

SUPER 1900-3 G

VÖGELE
Robust, powerful and easy to operate

The SUPER 1900-3 G-Tier takes and gives a lot. Paving base courses up to 30 cm thick requires extremely powerful and durable pavers. VÖGELE‘s SUPER 1900-3 G is a cost-efficient, heavy-duty tracked paver designed for paving both water-bound materials and asphalt mixes.

Quick view

SW 318 MC

WIRTGEN
Precise and Powerful Binding Agent Spreading
  • STREUMASTER binding agent spreaders are suitable both for spreading large quantities of binding agents during soil stabilisation and for spreading small quantities of binding agents with maximum precision during cold recycling.
  • There are various different types and series of binding agent spreaders. Essentially, these can be subdivided according to type into the categories truck-mounted spreaders (M – Mounted) and towed spreaders (T – Towed). In addition to the vehicle type, these types also differ in the form of their spreading units: STREUMASTER primarily offers spreaders with cellular wheel spreading units (C - Cellular wheel).
  • The MC series mobile binding agent spreaders are mounted on a carrier vehicle and are therefore predestined for use in difficult off-road terrain.
  • With a maximum spreading width of 2,360 mm the TC and MC series achieve spreading rates of up to 60 kg/m2 (at a speed of 2 km/h with a binder density of 1 kg/l).
  • In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent spreaders cover the complete cycle in road construction and earthworks.
Quick view

TCM 180

WIRTGEN
Optimum texture and protection for concrete surfaces up to 18.0 m wide
  • The modular machine design allows it to be adapted to working widths between 4.0 m and 18.0 m.
  • The self-propelled texture curing machine produces the desired surface textures on the freshly paved concrete surface.
  • The automated spraying system with a generously sized storage container effectively distributes the dispersion and protects the concrete surface from premature drying.
  • The various texture and spray modes as well as other texture alternatives offer a wide range of functionality.
  • An extensive array of options that can be combined without additional installation work make a wide variety of applications possible while guaranteeing maximum machine availability.
Quick view

W 150 Fi

WIRTGEN
Powerful, agile compact milling cutter for a variety of milling tasks
  • The most powerful cold milling machine in its compact class is particularly suitable for medium-sized construction projects in confined spaces, such as urban areas.
  • The innovative machine control Mill assist ensures sustainable, efficient machine operation with high productivity.
  • The MCS – Multiple Cutting System with Basic or Variabel options enables the use of various milling drums with a working width of 0.6 m to a maximum of 1.8 m for greater operational flexibility and machine efficiency.
  • The modern leveling system LEVEL PRO ACTIVE, the intuitive control concept and other digital assistance systems ensure efficient one-man control and precise milling results.
  • The optimised machine weight makes transport easier and the centrally positioned milling drum unit ensures ideal weight distribution and high traction.